WELCOME TO BEIJING AIHE NUCLEAR POWER TECHNOLOGY CO.,LTD.!
Home > PRODUCT GALLERY > CIVIL USE > Bag Filters
Application: Prefilters HVAC, industrial
Frame: Plastic, optional galvinization
Spacers: Synthetic
Bonding: -
Media: Synthetic
Gasket: Continuous poured gasket
Filter class according to EN779:2012: M5
Maximum/recommended final pressure drop: 450Pa
Maximum temperature: 70°C
Maximum relative humidity: 90%
• Totally combustible
• Lightweight frame
DETAIL
Qualities
AFPRO bag filters are used as a pre- or fine filter in air conditioning systems among other things. The filters are available in filter classes G3 - F9 in compliance with EN779:2012, besides which all M5 to F9 filters are certified by means of the EUROVENT “certify all” system. The filter media, made from both polymer and glass fibres, are assembled in a robust plastic, steel or aluminium frame. The aluminium frame is a new introduction for AFPRO filters – its advantage is its great stiffness and the detail of the finish level. With the new aluminium frames in combination with the aerodynamic finishing strips, the filters are even simpler to install, and they will have a lower resistance throughout
their lifetime.
Advantages of bag filters
Large filter area
Unique construction and opening of the filter bags
Very high dust retention capacity through use of high-grade filter materials
Long filter lifetime
Low energy consumption
Dimensioning according to EN15805
Corrosion free
Simple waste processing
Structure
The bag filters are constructed from bags with a unique structure through which as low a resistance as possible can be realised. The bags are assembled in an aluminium, plastic or steel frame. The filters resist up to 70°C and 95% RH.
New EN779:2012
The new EN779:2012 has ensured further development of many bag filter products. AFPRO Filters has made sure that all its bag filters comply with the new EN 779:2012 by improving the filter medium. Because AFPRO Filters makes a large proportion of the media itself,
this improvement could be made rapidly, and the new filters were immediately notified to EUROVENT. Through the EUROVENT “certify all” programme for air filters, the customer is assured of the quality of AFPRO Filters. Besides a polymer version, AFPRO Filters also
introduced a glass fibre version that generously complies with the minimum efficiency stipulated in EN 779:2012. Below, you can find the new classification table containing the new MTE values. For an F7 glass fibre filter, the minimum efficiency of the AFPRO filters is
58%; this is over 65% above the minimum requirement specified in EN779:2012.
Energy labels
Via EUROVENT, the bag filters have already obtained an energy label,as a result of which the mutual comparison of filters has become straightforward. A filter with a smaller filter area, fewer or shorter bags will have a poorer energy label and will use more energy in practice. The labels immediately clearly show the expected energy consumption,
which is very important considering that 70-80% of the life cycle costs are determined by energy. AFPRO has bag filters with A (most energy efficient) to G (least energy efficient) labels. As well as in this catalogue, you can find these labels on the EUROVENT website and on our boxes and filters.
All rights reserved ©BEIJING AIHE NUCLEAR POWER TECHNOLOGY CO.,LTD. Licenese No: ICP 15055386 TEL:+86 10 83719622